HOME > Product Category > Hinge >

Mobile Phone & PDA Hinge

These PDA & Mobile Phone hinge units are best suited for the connection point of a display unit , mobile phone , PDAs or t ranslation machine.
All products can be customized to individual specification.

 

Twin- Cam & Two-Way
L1
Specification
Size :(L) 55.00 mm (W) 8.2 mm
Torsion:0.40~ 0.70 Kg -cm
Characteristic : This Structure is two-way Close & Open Design with Side Positioning Angle is 0°~90° , Spin Close & Open Angle are 0° & 180°.
Life test 50,000 Times.
2D drawing
This PDA hinge unit is best suited for the connection point of display unit and the DVs, PDAs , DCSs, Mobilephone.
This unit allows user to flip the display part to outside and then spin close & open.
TS-50
Specification
Size :φ 12.50 mm (W) 7.10 mm
Torsion : 0.48 ~ 0.68 Kg -cm
Characteristic : The structure is twin- cam automatic open and close design with positioning angle of 0°~180° .The automatic open and close angles are 30°and 150°.
Life test 100,000 times.
2D drawing
This PDA hinge unit is best suited for the connection point of display unit and the DVs, PDAs, Mobilephone.
This unit allows user to flip the display part to outside and then auto close & open.
An example is shown in the movie.
PH-585114
Specification
Size :φ5.8mm (L) 14mm
Torsion: 0.45~ 0.65 Kg -cm
Characteristic : The structure is twin- cam automatic open and close design with positioning angle of 0°~180° .The automatic open and close angles are 30°and 150° .
Life test 50,000 times, 100,000 times at most.
2D drawing
Best suited for Mobile Phones.
This Mobile phone hinge unit is best suited for the connection point of display unit and the Mobilephone, PDAs, Translation machines.
Suitable for the automatic open-and-close mobile phones.
PH-584516
Specification
Size :φ5.8mm (L) 16mm
Torsion : 0.45~ 0.65 Kg -cm
Characteristic : The structure is twin- cam automatic open and close design with positioning angle of 0°~180° The automatic open and close angles are 30°and 150°.
Life test 50,000 times upwards; 100,000 times at most.
2D drawing
Best suited for Mobile Phones.
This mobile phone hinge unit is best suited for the connection point of display unit and the Mobilephone, PDAs, Translation machines.
Suitable for the automatic open-and-close mobile phones.

 

Single- Cam
PS1
Specification
Size :(L) 50.00 mm (W) 24.00 mm
Torsion : Clip : 1.30~1.60 Kg -cm, Parallel : 0.50~0.60 Kg -cm.
Characteristic :This Structure is Single- Cam Auto Close & Open Design with Positioning Angle is 0°~180° .
Life test 50,000 Times.
2D drawing
This mobile phone and PDA hinge unit is best suited for DVs, DCS, Mobilephone.
PHS-Sliding
Specification
Size :(L) 65.00 mm (W) 42.00 mm
Torsion :0.125 ~ 0.132 g -cm
Characteristic :This Structure is Single- Cam Auto Close & Open Design.
Life test 100,000 Times.
2D drawing
This PDA and mobile phone hinge unit is best suited for Mobilephone.

Twin- Cam & Two-Way (2D drawing):
L1
TS-50
PH-585114
PH-584516

Single- Cam (2D drawing):
PS1
PHS-Sliding